DC/AC Hybrid Solar Submersible Centrifugal Pump 3 inch 3UPH Solar Well Pump 3" Permanent magnet BLDC Solar water Pump Solar panel:3 - 6 pieces Poly / Mono 330 watt solar panel Power range:750 - 1500w Head range:0- 167m Flow range:0 - 5 m3/h Pump Outlet:1.25"
Solar Water Pump Catalogue
3HR Helical Rotor Solar Pumps
3SC Solar Well Pumps
4SC Solar Well Pumps
SCPM Solar Surface pumps
SJET Solar Surface pumps
SQB Solar Surface Booster Pump
SSP Solar Pool Pumps
DC/AC Hybrid Submersible Pump
DC/AC Hybrid Surface In-Line Pump
DC/AC Hybrid Surface Vertical Pump
Solar PV Panel
HYBSUN DC/AC Hybrid submersible solar pumps are fitted with a permanent magnet,brushless motor, Which enables the efficient use of energy from a wide range of supply options. The pump system offers the perfect water supply solution.Could be used for drinking water supply, livestock watering, pond management and irrigation applications,the living condition could be much improved.
1.Permanent magnet,brushless motor,saving energy and offering maximum efficiency. 2.NSK bearing with alloy mechanical seal,offering the longer working life. 3.MPPT function offers higher utilization rate of solar energy. 4. Water proof and leak proof based on double water seal. 5. Controller maximum's operating temperature:60℃ 6. Featured function:MPPT function,Soft start function,Dry running protection,Adjustable speed function, Error wiring protection,Over/under-voltage protection,Overload protection,Over-current protection, phase-loss protection,High working temperature protection 7.Very strong ROI against diesel powered pumping 8.Long life expectancy and proven in service record 9.High quality non-corrodible materials used 10.Designed for use in remote and harsh conditions
1.Power Supply: Solar panel | Storage batteries | Single phase city power | Generator 110V DC/AC Pump - AC voltage range:90-300V,DC voltage range:90-430V 150V DC/AC Pump - AC voltage range:90-300V,DC voltage range:90-430V 200V DC/AC Pump - AC voltage range:90-300V,DC voltage range:90-430V 300V DC/AC Pump - AC voltage range:90-300V,DC voltage range:90-430V 2.Water temperature:≤35℃ 3.PH value 6.5 ~ 8.0 4.Maximum immersion depth:90 Meter
HYBSUN design pump sizing tools,cable sizing tools,Solar panels sizing tools to help clients complete a whole solar pumping system
When solar panels are wired in a series, voltage is additive, but the amperage stays the same. But if you parallel wired panels the amperage would be additive, while the voltage remains the same.
|Power (W)||AC Voltage (V)||DC Voltage (V)||Rated Flow (m3/h)||Max.Flow (m3/h)||Rated Head (m)||Max.Head (m)||Outlet (Inch)|
HYBSUN DC/AC Hybrid solar submersible pump which gets the power from the sun, you will never have an electric bill, 3USH series DC/AC Hybrid solar submersible pump can not only be used for household drinking water, but for animal husbandry and irrigation. Which is a multistage centrifugal pump operating in a vertical position. Liquids, accelerated by the impeller, lose their kinetic energy in the diffuser where a conversion of kinetic to pressure energy takes place. This is the main operational mechanism of radial and mixed flow pumps. The pump shaft is connected to the gas separator or the protector by a mechanical coupling at the bottom of the pump. Fluids enter the pump through an intake screen and are lifted by the pump stages. Other parts include the radial bearings (bushings) distributed along the length of the shaft providing radial support to the pump shaft. An optional thrust bearing takes up part of the axial forces arising in the pump but most of those forces are absorbed by the protector’s thrust bearing.
HYBSUN 3USH DC/AC Hybrid series solar submersible pump consists of brass or SS304 pump outlet, SS304 pump housing, SS304 impeller and diffuser, SS304 oil cylinder, Brushless DC motor(BLDC motor),3 meters,4 cores,1.5mm2 cable, and controller with installation tools. For accessories which include float switch, adapter substitute, shrinkable tubes, adhesive tape, operation manual.
HYBSUN BLDC motor which consists of stator, rotor and oil cylinder For the stator which consists of silicon steel sheet & high-temperature copper wire. Whose the max temperature are 180 degrees.All winding automatically by machine, which can produce about 2000 pieces per day. For the rotor which includes 3 pieces NSK bearing, SS 304 shaft, and 40SH magnet. Whose the max temperature is 150 degrees. For the oil cylinder, we made our own design to make it better to avoid leaking water problems.
MPPT function Maximum Power Point Tracking is electronic tracking - usually digital. The charge controller looks at the output of the panels and compares it to the battery voltage. It then figures out what is the best power that the panel can put out to charge the battery. It takes this and converts it to the best voltage to get maximum AMPS into the battery. (Remember, it is Amps into the battery that counts). Most modern MPPT's are around 93-97% efficient in the conversion. You typically get a 20 to 45% power gain in winter and 10-15% in summer. Actual gain can vary widely depending on weather, temperature, battery state of charge, and other factors. Soft-start function HYBSUN controller controls the motor operation continues, operating power is gradually increased until the motor reaches its maximum speed. As a result, the service life of both the motor and controller and protection switchgear and prolonged. Dry running protection HYBSUN solar submersible pump’s controller that offers intelligent detection function of water level. when the water level dropped below the pump inlet, the HYBSUN controller will stop the pump and indicates a Well LED. Stop the pump automatically, Restarts automatically 30mins, Flexible installation. Adjustable speed function HYBSUN solar pump’s controller with adjustable speed function. Users could set different working speeds to adjust water capacity and head according to actual water demand to avoid water waste. Meanwhile, which also reduces the mechanical wear of the motor as well as the start-up loads on the PV array. Self-protecting functions Error wiring protection Over/under-voltage protection Overload protection Over-current protection phase-loss protection High working temperature protection
HYBSUN uses an SS304 impeller which is corrosion resistant due to the addition of chromium (minimum 10.5%) to the alloy. The chromium reacts with oxygen forming a chromium oxide barrier, shielding the iron from environmental oxygen and water. Nickel is also usually present in alloys of stainless steel to improve ductility.
Hereby guarantee that HYBSUN 3USH AC/DC solar centrifugal pumps are guaranteed against defects in material and technology for 24 months beginning from the date of shipping the goods from the factory. Within this period, adjustment, repair, or replacement of parts or whole will be performed without charge except in the case of damage caused by accidents, misuse, tampering, or lack of care. 2.Not under warranty 1)Defects caused by the owner's neglect of instructions in the manual before operation or misuse of the pump. 2)Operation on higher/lower voltage than specified, tampering with the electrical system, voltage surges as a result of lightning or faulty electrical supply. 3). Any damage caused by natural disasters, such as fire, flood, or earthquake. 4). The pump is tampered with or damaged by any non-authorized technician. 5). Maximum fluid temperature exceeds 35 degrees Celsius. 6). Maximum sand content exceeds 0.25%. 7). Putting water inside the controller by the user.
HYBSUN always insists to provide the best service, the delivery time is about 2 weeks.
HYBSUN could according to your demand to select the loading port, Normally, we choose Ningbo port.
Thanks to hybsun solar AC/DC pump, very smart and convenient
Founded in China during 2005 HYBSUN SOLAR CO.,LTD has pioneered, innovated and excelled in the engineering ,manufacturing and sales of solar powered water pumping system.
Copyright © 2019 HYBSUN SOLAR CO.,LTD All Rights Reserved.